Prof. Dr. Eng. Ir. Didik Nurhadiyanto, S.T., M.T., IPU, ASEAN Eng.

Status : Tenaga Pendidik

Prof. Dr. Eng. Ir. Didik Nurhadiyanto, S.T., M.T., IPU, ASEAN Eng. on Google Scholar

Identitas
NIP : 197106041997021001
NIDN : 0004067103
Jenis Kelamin : Laki-laki
Agama : Islam
Keahlian :

Rekayasa Material


Riwayat Pendidikan :

Unit Kerja
Fakultas Teknik
Jurusan :
Pendidikan Teknik Mesin
Golongan / Pangkat :
IV/c / Pembina Utama Muda
Jabatan :
Guru Besar
Contact
email : didiknur@uny.ac.id
Blog :
Facebook :
Bidang Pendidikan

.

 

File Bidang Pendidikan :
 8+PRAKTIK+KERJA+BANGKU
14+FISIKA+TEKNIK
MATEMATIKA
MEKANIKA+TEKNIK+DASAR
PROSES+PEMESINAN+1
Silabus+Mata+Kuliah+Elemen+Mesin
Mata+Kuliah+Elemen+Mesin
All penilaian didik N 21 April_9
Bidang Penelitian

The Effects of Situastional Factors in the Implementation of WOrk-Based Learning Model on Vocational Education in Indonesia

File Bidang Penelitian :
 Abstract+of+research+which+is+title+The+Experimental+Charge+and+Discharge+Tanks
Abstrak+Penelitian+Daun+Agel
Abstrak+Penelitian+PBL-Remedial
Abstract+penelitian+Experimental+Study+on+the+Influence+of+Vibrator+on+Pad+Vibration+as+a+Result+of+ABS+Effect+in+Disc+Breaking
Abstrak+penelitian+Dana+DIK+UNY+no+kontrak+1181gJ3515+DIK+KU+2001
Abstrak+Jurnal+Saintek+Vol+7+No+1+April+2002,+ISSN+1412-3991
Abstrak+Jurnal+Sainteks+Vol+7+No+2,+Oktober+2002,+ISSN+1412-3991
Abstrak+Jurnal+Dinamika+Vol+2+No+1+Mei+2004,+ISSN+1693-251+x
abstrak+Jurnal+Inotek+Inotek+Vol+7+No+1,+Juni+2004,+ISSN+1411-3554
Abstrak+Jurnal+terakreditasi+Kependidikan+No+1+Tahun+XXXIV,+Mei+2004,+ISSN+0125-992+x
Abstrak+Jurnal++Inoteks+Vol+9+No+2+Agustus+2005,+ISSN+1411-3554
Abstrak+Jurnal+Dinamika+Volume+3+No+1+Mei+2005,+ISSN+1693-251+x
Abstrak+Jurnal+Nasional+Dinamika+Vol+4+No+1+Mei+2006,+ISSN+1693-251X
Abstrak+Jurnal+Nasional+Terakreditasi+Media+Teknik+UGM+2006
Abstrak+Jurnal+Nasional+terakreditasi+Teknologi+Academia+ISTA+Vol+11+No+1,+Agustus+2006,+ISSN+1410-5829
Abstrack+Jurnal+Inoteks+Vol+10+No+2,+Agustus+2007,+ISSN+1411-3554
Abstrak+Jurnal+Nasional+Terakreditasi+Teknologi+Academia+ISTA+Vol+11+No+2+Februari+2007,+ISSN+141-5829
Abstrak+Jurnal+Sainteks+Vol+15+No+2+Oktober+2010,+ISSN+1412-3991
Prosiding+Seminar+Nasional+Sains+dan+Teknologi+Unwahas+Semarang+2010
Proceeding+The+8th+International+Conference+on+Innovation+and+Management+Technology,+2011
The+International+Journal+of+Mechanical+and+Aerospace+Engineering,+6+2012
The+International+Journal+of+World+Academy+of+Science,+Engineering+and+Technology,+74+2013
Abstract+the+international+journal+Pressure+Vessels+and+Piping,+Elsevier,+ISSN+0308-0161,+Vol+111-112+(2013)+146-154
Abstract+the+international+journal+of+Applied+Mechanics+and+Material,+Vol+392,+ISSN+1660-9336,+2013
Abstrak+Jurnal+Nasional+Media+Teknika+Vol+6+No+2,+Desember+2006
Absract+International+Journal+of+Advanced+Materials+Research+Vol+856+(2013)+pp+92-97
optimization-new-25a-size-metal-gasket-design-based-contact-width-considering-forming-and-contact-st
surface-roughness-flange-contact-25a-size-metal-gasket-using-fem-simulation
influence-surface-roughness-new-metal-gasket
deformation-characteristic-thin-stainless-gasket-material
contact-width-analysis-corrugated-metal-gasket-based-surface-roughness
contact-stress-and-contact-width-analysis-corrugated-metal-gasket
development-25a-size-three-layer-metal-gasket-using-fem-simulation
Development-of-25A-Size-Three-Layer-Metal-Gasket-by-Using-FEM-Simulation
Analysis of Contact Width and Contact Stress of Three Layer Corrugated Metal Gasket_2017
The Characteristics of Aluminum Casting Product Using Centifugal Casting Machine _ICTVT_AT30
Artikel di Journal of Fundamental and Applied Sciences 2018
Nurhadiyanto_2018_IOP_Conf_Ser__Mater_Sci_Eng_307_012005
Ballistic Performance_Advanced Science Letters
Decortification Effect_Advanvced Science Letters
1672-Article Text-4780-1-10-20180509_2
IJMET_10_04_029
Sertifikat Paten Superkapasitor
Sertifikat panel komposit
Sertifikat Konverter Kit
Sertifikat_26 april 2021-metode mengkonversi
Sertifikat_Paten_Burner menggunakan
Bidang Pengabdian
File Bidang Pengabdian :
 sertifikat-ppmdidik
laporan-vucer-meja-kerja
laporan-vucer-meja-perata
laporan-vucer-mesin-penggiling-bakso
Makalah PPM_Dididk Nurhadiyanto_2016
CV khusus PPM
Lain-lain
File Lain-Lain :
 Syarat Tambahan_Penelitian DRPM_Tahun 2019_Didik Nurhadiyanto1
Syarat tambahan_Penelitian DRPM_2021_Didik Nurhadiyanto1
CV lengkap Agustus 2022
Karya Terindex Google Scholar
Judul Sitasi
Optimization of new 25A-size metal gasket design based on contact width considering forming and contact stress effect9
Influence of surface roughness on leakage of new metal gasket8
Penelitian tindakan untuk meningkatkan kualitas pembelajaran melalui pendekatan konstruktivistik dan evaluasi berbasis kinerja dalam matakuliah Fisika pada siswa Jurusan Pendidikan Teknik Mesin FT Universitas Negeri Yogyakarta4
Surface Roughness of Flange Contact to the 25A-size Metal Gasket by using FEM Simulation2
Development of 25A-Size Three-Layer Metal Gasket by Using FEM Simulation1
Influence of surface roughness on leakage of the corrugated metal gasket1
Contact Width Analysis of Corrugated Metal Gasket based on Surface Roughness1
Contact Width Evaluation of New 25A-size Metal Gasket Considering Forming Effect1
PENGARUH KEKENTALAN PENDING IN TERHADAP KEAUSAN PAD A PAHAT BERMATA POTONG GANDA1
GETARAN STRUKTUR0
Contact Stress and Contact Width Analysis of Corrugated Metal Gasket0
Deformation Characteristic of Thin Stainless Gasket Material0
ANALISIS PAHAT INSERT BERMATA POTONG GANDA UNTUK MENGURANGI KEAUSAN PAHAT PADA MESIN BUBUT0
CURICULUM VITAE0
PENINGKATAN PRODUKTIVITAS PEDAGANG BAKSO ECBRAN MELALUI PENGGUNAAN MESIN PENGGILING DAN PENCAMPUR BAHAN BAKSO0
PENINGKATAN RASIO PEMAMPATAN TEBAL GERAM DAN PENGURANGAN KEAUSAN PAHAT DENGAN MEMODIFIKASI PAHAT BERMATA POTONG DVA PADA MESIN BUBUT0
ANALISIS PENGARUH KECEPATAN PEMAKANAN DAN KEDALAMAN POTONG TERHADAP TEMPERATUR PAHAT PADA MESIN BUBUT0
MEJA KERJA DENGAN ALAT PEMBUAT LUBANG PEN UNTUK MENINGKATKAN KUALITAS DAN KECEPATAN PEMBUATAN PINTU KAYU0